Show simple item record

dc.contributor.authorD. W. Schmueser
dc.contributor.authorL. E. Wickliffe
dc.date.accessioned2017-05-08T23:24:55Z
dc.date.available2017-05-08T23:24:55Z
dc.date.copyrightJanuary, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26913#72_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102551
dc.description.abstractThis paper presents the results of an impact testing program that was conducted to characterize the energy absorption and failure characteristics of selected composite material systems and to compare the results with aluminum and steel. Composite tube specimens were constructed using graphite/epoxy (Gr/Ep), Kevlar/epoxy (K/Ep), and glass/epoxy (Gl/Ep) prepreg tape and were autoclave cured. Vertical impact and static compression tests were performed on 56 tubes. Tests results for energy absorption varied significantly as a function of lay-up angle and material type. In general, the Gr/Ep tubes had specific energy absorption values that were greater than those for K/Ep and Gl/Ep tubes having the same ply construction. Angle-ply Gr/Ep and K/Ep tubes had specific energy absorption values that were greater than those for 1024 steel tubes. Gr/Ep and Gl/Ep angle-ply tubes exhibited brittle failure modes consisting of fiber splitting and ply delamination, whereas the K/Ep angle-ply tubes collapsed in an accordian buckling mode similar to that obtained for metal tubes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleImpact Energy Absorption of Continuous Fiber Composite Tubes
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225937
dc.journal.fristpage72
dc.journal.lastpage77
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsFibers
dc.keywordsAbsorption
dc.keywordsEpoxy adhesives
dc.keywordsFailure
dc.keywordsSteel
dc.keywordsGlass
dc.keywordsMetals
dc.keywordsAluminum
dc.keywordsBrittleness
dc.keywordsConstruction
dc.keywordsGraphite
dc.keywordsImpact testing
dc.keywordsDelamination
dc.keywordsBuckling AND Compression
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record