Show simple item record

dc.contributor.authorJ. C. Gerdeen
dc.contributor.authorW. W. Predebon
dc.contributor.authorP. M. Schwab
dc.contributor.authorA. Shah
dc.date.accessioned2017-05-08T23:24:55Z
dc.date.available2017-05-08T23:24:55Z
dc.date.copyrightJanuary, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26913#53_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102547
dc.description.abstractYielding in a crystal structure occurs with plastic slip on preferential planes. It is similar to yielding on maximum shear planes in an isotropic continuum, but in this case the slip is anisotropic. The anisotropic slip is described by 24 piecewise, continuous yield functions, also known as the generalized Schmid’s law for FCC crystals. The plastic strain increment for any one slip mechanism is assumed given by the potential flow law of plasticity. However, there are combined slip situations where two or more slip mechanisms are activated simultaneously. In this paper, the plastic strains for all the possible intersections in FCC crystals are derived, i.e., for intersections of two, four, and eight yield surfaces of compatible stress states. A strain hardening modulus H′ is included by defining an equivalent shear stress τ and an equivalent plastic shear strain γ p for each slip system. The analysis is programmed for finite-element solution on the computer, by defining a strain “vector” {dε}, a stress “vector” {dσ}, and an elastic-plastic compliance [C] for each element, relating the strain and stress vectors. The analysis is applied to the elastic-plastic yielding of directionally solidified eutectic systems of Co-CoAl which solidify into a lamellar structure. A plane strain analysis is compared with experiments and good correlation is found for the stress concentration effect when the lamellae have termination points.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic-Plastic Analysis of Directionally Solidified Lamellar Eutectic Composites
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225933
dc.journal.fristpage53
dc.journal.lastpage58
dc.identifier.eissn1528-8889
dc.keywordsFlow (Dynamics)
dc.keywordsPlasticity
dc.keywordsCrystals
dc.keywordsCrystal structure
dc.keywordsComposite materials
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsStress concentration
dc.keywordsIntersections
dc.keywordsCoal
dc.keywordsFinite element analysis
dc.keywordsComputers
dc.keywordsEutectic alloys
dc.keywordsFunctions
dc.keywordsPlane strain
dc.keywordsWork hardening AND Mechanisms
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record