Show simple item record

dc.contributor.authorS. R. Swanson
dc.contributor.authorA. P. Christoforou
dc.date.accessioned2017-05-08T23:24:54Z
dc.date.available2017-05-08T23:24:54Z
dc.date.copyrightJanuary, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26913#12_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102539
dc.description.abstractDespite a number of previous investigations, the question of what criterion to use to predict ultimate failure in fiber composite laminates is still open to question, and particulary so when the overall loading involves biaxial stresses. We have addressed this question by developing a progressive failure model, and comparing the model to experiments on biaxial loading of tubular specimens of quasi-isotropic AS4/3501-6 carbon/epoxy laminates. The progressive failure model uses a modified Tsai-Wu criterion for initial ply cracking, a rule for softening the ply stiffness coefficients with continued straining, and an ultimate failure criterion. It was found that a maximum fiber strain criterion agreed very well with the experiments.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleProgressive Failure in Carbon/Epoxy Laminates Under Biaxial Stress
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225924
dc.journal.fristpage12
dc.journal.lastpage16
dc.identifier.eissn1528-8889
dc.keywordsLaminates
dc.keywordsStress
dc.keywordsEpoxy adhesives
dc.keywordsCarbon
dc.keywordsFailure
dc.keywordsFibers
dc.keywordsComposite materials
dc.keywordsStiffness AND Fracture (Process)
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record