Show simple item record

dc.contributor.authorH. T. Hahn
dc.date.accessioned2017-05-08T23:24:54Z
dc.date.available2017-05-08T23:24:54Z
dc.date.copyrightJanuary, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26913#3_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102538
dc.description.abstractThe use of micromechanics equations for moisture diffusivity shows that the in situ diffusivity is slightly lower than the bulk diffusivity for matrix resins, thereby indicating absence of any matrix damage in virgin composites. When exposed to hygrothermal environments, however, composites undergo degradation which manifests itself in anomalous moisture diffusion behavior and reduced structural performance. The hygrothermal degradation is the result of matrix plasticization, microvoid formation, and microcracking. The time dependence of plasticization as well as the tensile stress resulting from steep moisture gradient is responsible for the damage induced by thermal spiking of wet composites. Swelling of neat resins is frequently less than predicted by the volume additivity. A simple micromechanics analysis provides a good estimate of composite swelling strain from resin properties. The bilinearity and the hysteresis observed in relations between swelling and moisture content are attributed to the existence of a threshold moisture concentration below which swelling is negligible. Relaxation of residual stresses is a long-term process under nonhostile environments. However, it is accelerated considerably around and above the glass transition temperature. The fast stress relaxation can change the transverse ply stress from compressive to tensile after thermal spiking, thereby inducing ply cracking and accelerating the subsequent moisture absorption. How residual stresses can affect ply cracking and delamination is shown through a fracture mechanics analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHygrothermal Damage in Graphite/Epoxy Laminates
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225930
dc.journal.fristpage3
dc.journal.lastpage11
dc.identifier.eissn1528-8889
dc.keywordsFracture mechanics
dc.keywordsTemperature
dc.keywordsDiffusion (Physics)
dc.keywordsComposite materials
dc.keywordsAbsorption
dc.keywordsLaminates
dc.keywordsResidual stresses
dc.keywordsRelaxation (Physics)
dc.keywordsStress
dc.keywordsEpoxy adhesives
dc.keywordsMicromechanics (Engineering)
dc.keywordsFracture (Process)
dc.keywordsEquations
dc.keywordsGlass transition
dc.keywordsGradients
dc.keywordsGraphite
dc.keywordsResins
dc.keywordsTension AND Delamination
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record