Show simple item record

dc.contributor.authorCheng Ping Chiu
dc.contributor.authorMin Chin Hsieh
dc.date.accessioned2017-05-08T23:24:53Z
dc.date.available2017-05-08T23:24:53Z
dc.date.copyrightApril, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26916#171_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102531
dc.description.abstractResidual stresses (R.S.) in a microcomputer-controlled injection molded ABS terpolymers have been determined. The layer-removal method and the microscopic measurement techniques were used to evaluate the stresses in these molded articles. The relationship between the R.S. and the processing parameters such as injection pressure, holding pressure, holding time, injection rate, and mold temperature was studied. Experimental results indicated that, at the higher injection rates (>10g/s), the R.S. are compressive in the surface layer and tensile in the interior; however, at the lower injection rates (<10g/s), the residual stresses are tensile in the surface layer and compressive in the interior. The results also indicated that the higher the injection rate, the lower the residual stresses; the compressive residual stresses increased in proportion to the increase of holding pressure; the residual stresses could be decreased by keeping a higher mold temperature; the longer the holding time, the higher the compressive R.S. and the lower the tensile R.S.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Correlation Between the Residual Stresses of ABS Terpolymers and Injection Molding Conditions
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225958
dc.journal.fristpage171
dc.journal.lastpage175
dc.identifier.eissn1528-8889
dc.keywordsResidual stresses
dc.keywordsInjection molding
dc.keywordsPressure
dc.keywordsTemperature AND Stress
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record