Show simple item record

dc.contributor.authorMasahiro Endo
dc.contributor.authorYukitaka Murakami
dc.date.accessioned2017-05-08T23:24:52Z
dc.date.available2017-05-08T23:24:52Z
dc.date.copyrightApril, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26916#124_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102523
dc.description.abstractIn order to elucidate the effect of small defects on the torsional fatigue strength of steels, reversed torsion tests were carried out on the 0.46 percent C steel specimens containing a small hole. The hole diameter ranges from 40 to 500μm. The fatigue behaviors on the specimen surface and near the hole were observed with the aid of a microscope. The torsional fatigue strength of steels containing small holes can be predicted from the results of rotating bending fatigue test by considering the threshold condition for crack propagation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of an Artificial Small Defect on Torsional Fatigue Strength of Steels
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225951
dc.journal.fristpage124
dc.journal.lastpage129
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsFatigue strength
dc.keywordsFatigue testing
dc.keywordsMicroscopes
dc.keywordsFatigue
dc.keywordsProduct quality
dc.keywordsTorsion AND Crack propagation
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record