Show simple item record

dc.contributor.authorMasakazu Okazaki
dc.contributor.authorTakashi Koizumi
dc.date.accessioned2017-05-08T23:24:52Z
dc.date.available2017-05-08T23:24:52Z
dc.date.copyrightApril, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26916#114_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102521
dc.description.abstractThe surface and through crack growth behaviors of some steels in thermal-mechanical and isothermal low-cycle fatigue at elevated temperatures were investigated. It was shown that the crack growth rate under each test condition was successfully correlated with the cyclic J-integral range by the simple power law equation, regardless of crack configurations and test controlling modes. Based on the results thus obtained, the relationship between the crack growth rates of the two types of fatigue was discussed. When the crack growth rates in thermal-mechanical and isothermal low-cycle fatigue at elevated temperatures were correlated with the parameter of which the range of cyclic J-integral was divided by the equivalent flow stress defined in this work, they could be represented by a single curve approximately. The crack growth rates in isothermal fatigue under various test temperatures could be also represented by the same single crack growth curve described above, regardless of the test materials. From the above result, it was found that the difference of crack growth rate in both types of fatigue merely resulted from the difference of equivalent flow stress.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRelationship of Crack Growth Between Thermal-Mechanical and Isothermal Low-Cycle Fatigue at Elevated Temperatures
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225949
dc.journal.fristpage114
dc.journal.lastpage118
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsFracture (Materials)
dc.keywordsLow cycle fatigue
dc.keywordsFatigue
dc.keywordsFlow (Dynamics)
dc.keywordsStress
dc.keywordsEquations
dc.keywordsSteel AND Testing equipment
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record