Show simple item record

dc.contributor.authorJ. Wittenauer
dc.contributor.authorO. D. Sherby
dc.date.accessioned2017-05-08T23:24:51Z
dc.date.available2017-05-08T23:24:51Z
dc.date.copyrightJuly, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26917#244_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102515
dc.description.abstractLaminates based on ultrahigh carbon steel were prepared and found to exhibit enhanced fatigue life as compared to a monolithic reference material. This result was achieved through the insertion of weak interlaminar regions of copper into the layered material during preparation of the laminates. The presence of these regions allowed for the operation of a delamination mechanism in advance of the propagating fatigue crack. The result was interlaminar separation and associated crack blunting. Stress-life curves show that an increase in life by as much as a factor of four is achieved for these materials when compared to monolithic specimens of similar processing history.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFactors Influencing the Fatigue Behavior of Ferrous Laminates
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225971
dc.journal.fristpage244
dc.journal.lastpage251
dc.identifier.eissn1528-8889
dc.keywordsLaminates
dc.keywordsFatigue
dc.keywordsSeparation (Technology)
dc.keywordsCopper
dc.keywordsCarbon steel
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFatigue cracks
dc.keywordsFatigue life
dc.keywordsDelamination AND Mechanisms
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record