Show simple item record

dc.contributor.authorM. Sakane
dc.contributor.authorM. Sawada
dc.contributor.authorM. Ohnami
dc.date.accessioned2017-05-08T23:24:51Z
dc.date.available2017-05-08T23:24:51Z
dc.date.copyrightJuly, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26917#236_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102514
dc.description.abstractThis paper describes the crack growth direction in biaxial low cycle fatigue under combined axial and torsional stresses in hollow cylindrical specimens of type 304 stainless steel at 923 K in air. Three types of crack are identified, namely macrocrack greater than 1 mm in length, subcracks between 0.1 mm and 1.0 mm in length, and microcracks less than 0.1 mm in length. The macrocrack direction as well as that of the subcrack depends on the principal strain ratio but the microcrack is mode I for all the principal strain ranges tested. The connection of the three types of crack is discussed in relation to the surface oxidation. Typical strain stress and criteria for the biaxial low cycle fatigue failure are applied to the experimental data and their applicability is discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Modes and Low Cycle Biaxial Fatigue Life at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225970
dc.journal.fristpage236
dc.journal.lastpage243
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsCycles
dc.keywordsFailure
dc.keywordsFatigue life
dc.keywordsLow cycle fatigue
dc.keywordsMicrocracks
dc.keywordsoxidation AND Stainless steel
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record