Show simple item record

dc.contributor.authorS. Saimoto
dc.date.accessioned2017-05-08T23:24:51Z
dc.date.available2017-05-08T23:24:51Z
dc.date.copyrightJuly, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26917#230_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102512
dc.description.abstractStrain rate sensitivity is a measurement of the thermodynamic response of materials to changes in stress (τ). Correlations of the theoretical derivations to measured values are only valid if the strain rate (γ̇) is performed at constant structure (Σ). Thus transients during strain rate change obliterate the subtleties of the data especially since the strain rate sensitivity ∂lnτ∂lnγ̇T,Σ is of the order of 10−2. These transients, which are due to the inherent interactive nature of the testing frame of conventional tensile machines, can be nullified. This compensation results in a step-ramp in the displacement-time plot such that precision strain rate sensitivity can be measured. Moreover it is convincingly shown that the true elastic response of polyethylene including the unrelaxed modulus can be measured. Examples of evaluated material characteristics are: 1) the work to intersect dislocations at 0 K in dilute Al crystals. 2) the composition of interstitial solutes from which the solvus for NbCN in ferritic stainless steel can be determined. 3) the clustering in Al-4wt percent Cu during early GPI formation from which bond strength can be estimated.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Characterization of Materials by Precision Strain Rate Sensitivity
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225969
dc.journal.fristpage230
dc.journal.lastpage235
dc.identifier.eissn1528-8889
dc.keywordsAccuracy
dc.keywordsMaterials characterization
dc.keywordsDislocations
dc.keywordsDisplacement
dc.keywordsStainless steel
dc.keywordsCrystals
dc.keywordsMachinery
dc.keywordsStress
dc.keywordsStructural frames
dc.keywordsBond strength AND Testing
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record