Show simple item record

dc.contributor.authorInhoy Gu
dc.date.accessioned2017-05-08T23:24:50Z
dc.date.available2017-05-08T23:24:50Z
dc.date.copyrightJuly, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26917#216_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102509
dc.description.abstractFor a stationary crack of an initially finite root radius in plane-strain tension, the strain fields around the smoothly blunted crack-tip are calculated for each deformation stage using the slipline field method for nonhardening plastic material. The crack growth initiation from the blunt crack-tip in small-scale yielding, with a full triaxiality ahead of the crack-line, is predicted based on the fracture criterion of the fracture strain at a characteristic distance, obtained by applying the criterion to the case of a sharp crack-tip, in which the effect of the initial root radius on the strain distribution can be neglected. The predicted toughness for mild steel is in reasonable agreement with an experiment. For other materials, the observed J-integral value at fracture initiation, consistent with the present analysis, increases linearly with the initial root radius, but its rate shows a large deviation from the model, which is discussed due to the shear band development. The analysis also predicts that the toughness of a cracked low-ductility material does not increase by making the initial crack-root profile round, and that the reduced triaxiality at the crack-tip brings about a toughness increase.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCrack-Tip-Acuity Effect on Crack Growth Initiation
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225966
dc.journal.fristpage216
dc.journal.lastpage220
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsSteel
dc.keywordsShear (Mechanics)
dc.keywordsDuctility
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsPlane strain
dc.keywordsTension
dc.keywordsToughness AND Plastics
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record