Show simple item record

dc.contributor.authorR. A. Mayville
dc.contributor.authorT. J. Warren
dc.contributor.authorP. D. Hilton
dc.date.accessioned2017-05-08T23:24:50Z
dc.date.available2017-05-08T23:24:50Z
dc.date.copyrightJuly, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26917#188_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102505
dc.description.abstractSustained load and rising displacement tests were performed on precracked specimens to investigate the environmentally assisted cracking (EAC) behavior of AISI 4340, σ0 = 1095 MPA (159 ksi), in flowing synthetic seawater. J-R resistance curves were generated in environment over four orders of magnitude in displacement rate and KIJ (from JIC ) from the slowest test was found to agree closely with the KIEAC (KISCC ) value determined from cantilever beam tests. Crack velocity data from the slowest rising displacement test and constant stroke—decreasing KI —tests fall on the same line suggesting that there is a unique ȧ-KI curve for EAC in this system. A method is suggested to determine the displacement rate needed to obtain a good estimate of KIEAC from a rising displacement test.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Influence of Displacement Rate on Environmentally Assisted Cracking of Precracked Ductile Steel Specimens
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225962
dc.journal.fristpage188
dc.journal.lastpage193
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsFracture (Process)
dc.keywordsDisplacement
dc.keywordsSeawater
dc.keywordsCantilever beams
dc.keywordsElectrical resistance
dc.keywordsStress AND Fracture (Materials)
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record