Show simple item record

dc.contributor.authorA. Hizume
dc.contributor.authorY. Takeda
dc.contributor.authorH. Yokota
dc.contributor.authorY. Takano
dc.contributor.authorA. Suzuki
dc.contributor.authorS. Kinoshita
dc.contributor.authorM. Koono
dc.contributor.authorT. Tsuchiyama
dc.date.accessioned2017-05-08T23:24:49Z
dc.date.available2017-05-08T23:24:49Z
dc.date.copyrightOctober, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26918#319_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102495
dc.description.abstractThe upper limit of steam temperature which 12Cr steel rotors can withstand has been considered to be 566°C, but the recent projects on the advanced steam turbine of large capacity demand to raise it. The key factor in upgrading the creep rupture strength of the existing 12Cr steel rotors is to adjust “Equivalent Molybdenum Content” to the optimum, which is 1.5 percent in case no tungsten is contained. A HP-IP rotor, of 11 tons in final machined weight, for EPDC’s Wakamatsu high-temperature turbine to be operated with 593/593°C steam, has been manufactured with the chemical composition of C 0.14, Si 0.08, Mn 0.51, P 0.013, S 0.001, Ni 0.60, Cr 10.23, Mo 1.48, V 0.17, Nb 0.056, N 0.045, and Al 0.002 percent, respectively, through ESR process, Its creep rupture strength after heat treatment is 122 MPa for 593°C and 105 hr. The paper reports the concept of this material and the actual achievement in Wakamatsu rotor forging, referring to the working condition expected on the rotors for 1000 MW-class advanced steam turbine.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Advanced 12Cr Steel Rotor Applicable to Elevated Steam Temperature 593°C
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225984
dc.journal.fristpage319
dc.journal.lastpage325
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsRotors
dc.keywordsSteam
dc.keywordsSteam turbines
dc.keywordsRupture
dc.keywordsCreep
dc.keywordsWeight (Mass)
dc.keywordsTurbines
dc.keywordsmolybdenum
dc.keywordsForging
dc.keywordsHeat treating (Metalworking)
dc.keywordsTungsten AND High temperature
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record