Show simple item record

dc.contributor.authorD. Socie
dc.date.accessioned2017-05-08T23:24:48Z
dc.date.available2017-05-08T23:24:48Z
dc.date.copyrightOctober, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26918#293_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102491
dc.description.abstractTwo multiaxial fatigue damage models are proposed: a shear strain model for failures that are primarily mode II crack growth and a tensile strain model for failures that are primarily mode I crack growth. The failure mode is shown to be dependent on material, strain range and hydrostatic stress state. Tests to support these models were conducted with Inconel 718, SAE 1045, and AISI Type 304 stainless steel tubular specimens in strain control. Both proportional and non-proportional loading histories were considered. It is shown that the additional cyclic hardening that accompanies out of phase loading cannot be neglected in the fatigue damage model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMultiaxial Fatigue Damage Models
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225980
dc.journal.fristpage293
dc.journal.lastpage298
dc.identifier.eissn1528-8889
dc.keywordsFatigue damage
dc.keywordsFailure
dc.keywordsFracture (Materials)
dc.keywordsStainless steel
dc.keywordsHydrostatics
dc.keywordsStress
dc.keywordsHardening AND Shear (Mechanics)
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record