Show simple item record

dc.contributor.authorBekir Sami Yilbas
dc.date.accessioned2017-05-08T23:24:48Z
dc.date.available2017-05-08T23:24:48Z
dc.date.copyrightOctober, 1987
dc.date.issued1987
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26918#282_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102488
dc.description.abstractIn practical applications of laser drilling the quality of the drilled hole is the critical factor, and recently methods of studying the influence on quality of the main process variables have been developed, which seek to improve quality rather than explain the drilling mechanism. Hole quality can be judged by: internal form and taper and related geometrical features, and the extent of heat affected materials. The optimum performance in laser drilling depends very much upon the proper selection of laser parameters as well as the physical properties of the workpiece material. With so many variables, and incomplete knowledge of the relationships between them, statistical methods are needed to design experiments and analyze the results. In the present work five factors at four levels were considered. Four factors are given quantative; one, the material specification, is qualitative. The result is that the design has four blocks indentified with materials each of which can be treated as a complete factorial design. However, the materials can be described quantitatively by their physical properties, so the results were correlated with the groups generated by the dimensional analysis. It is observed that main effects of laser parameters as well as their interactions, have significant effects on all features of hole geometry. Drilling medium pressure was found to be very effective factor, since its interactions with the other parameters in any order are significant.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStudy of Affecting Parameters in Laser Hole Drilling of Sheet Metals
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225978
dc.journal.fristpage282
dc.journal.lastpage287
dc.identifier.eissn1528-8889
dc.keywordsLasers
dc.keywordsDrilling
dc.keywordsSheet metal
dc.keywordsDesign
dc.keywordsGeometry
dc.keywordsMechanisms
dc.keywordsHole quality
dc.keywordsDimensional analysis
dc.keywordsPressure AND Heat
dc.treeJournal of Engineering Materials and Technology:;1987:;volume( 109 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record