Show simple item record

dc.contributor.authorD. C. Hainley
dc.contributor.authorM. Z. Haji-Sulaiman
dc.contributor.authorS. Yavuzkurt
dc.contributor.authorA. W. Scaroni
dc.date.accessioned2017-05-08T23:24:40Z
dc.date.available2017-05-08T23:24:40Z
dc.date.copyrightJune, 1987
dc.date.issued1987
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26416#58_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/102381
dc.description.abstractThis paper presents operating experience with a fluidized bed combustor burning various coals. The primary focus is on the effect of relevant coal properties on combustor performance. Tests were carried out using anthracite, HVB and HVC bituminous and sub-bituminous A coals, and petroleum coke. Comparisons of the performance of the combustion on the various fuels are made. A two-stage fluidized bed combustor operating in a single-stage mode without recycle was employed. Experimental measurements included temperature, fuel feed rate, fluidization velocity and bed height. For some of the coals, bed agglomeration was found to occur. The results indicate that coal properties have an important effect upon the operation of the fluidized bed combustor.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOperating Experience With a Fluidized Bed Test Combustor
dc.typeJournal Paper
dc.journal.volume109
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231325
dc.journal.fristpage58
dc.journal.lastpage65
dc.identifier.eissn1528-8994
dc.keywordsCombustion chambers
dc.keywordsFluidized beds
dc.keywordsCoal
dc.keywordsCombustion
dc.keywordsFuels
dc.keywordsCoke
dc.keywordsFluidization
dc.keywordsMeasurement
dc.keywordsPetroleum AND Temperature
dc.treeJournal of Energy Resources Technology:;1987:;volume( 109 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record