Show simple item record

dc.contributor.authorR. A. Whipple
dc.date.accessioned2017-05-08T23:23:16Z
dc.date.available2017-05-08T23:23:16Z
dc.date.copyrightFebruary, 1986
dc.date.issued1986
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28266#98_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101603
dc.description.abstractStresses and displacements for a nozzle connection typical of those found in large storage tanks or pressure vessels were measured for applied radial forces, circumferential moments and longitudinal moments. The test program was conducted on a 12 1/2-in-dia penetration, centered and welded into a 60 in. × 60 in. cylindrical panel with a radius to thickness ratio of 1264. The nozzle diameter to cylindrical shell diameter ratio was 0.05. The panel edges were bolted to a stiff rectangular frame. This report presents the measured radial deflections and nozzle rotations, the membrane stress resultants and shell bending moments in the vicinity of the penetration along with penetration membrane and bending stresses for the three loadings. A brief description of the model and the test procedure is also presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Investigation of Nozzle-Induced Cylindrical Shell Stresses Where R/T = 1264
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264758
dc.journal.fristpage98
dc.journal.lastpage107
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsNozzles
dc.keywordsPipes
dc.keywordsMembranes
dc.keywordsShells
dc.keywordsThickness
dc.keywordsStorage tanks
dc.keywordsStructural frames
dc.keywordsBending (Stress)
dc.keywordsForce
dc.keywordsPressure vessels AND Deflection
dc.treeJournal of Pressure Vessel Technology:;1986:;volume( 108 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record