Show simple item record

dc.contributor.authorS. N. Malik
dc.contributor.authorV. K. Sazawal
dc.date.accessioned2017-05-08T23:23:13Z
dc.date.available2017-05-08T23:23:13Z
dc.date.copyrightMay, 1986
dc.date.issued1986
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28269#151_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101576
dc.description.abstractThis paper describes the stress analysis performed to assess structural adequacy of the Clinch River Breeder Reactor (CRBR) core removable shield assemblies. Removable shield assemblies are located in the peripheral region of the core (between blanket assemblies and the fixed radial shield), and are subjected to severe cross-sectional thermal gradients and seismic loads requiring a relatively complex duct load pad design. For cost-effectiveness, the analysis was conducted in two stages. First, an elasto-plastic seismic stress analysis was performed using a detailed nonlinear finite element model (with gaps) of the load pad configuration. Next, in order to determine the total strain accumulation and the creep-fatigue damage the maximum seismic stresses combined with the “worst” thermal stresses from a single assembly model were used to perform a simplified inelastic analysis using two sets of material properties to bound the changing material conditions during reactor operation. This work demonstrated the necessity and applicability of the two simplified analysis techniques in elevated temperature structural design, i.e., the treatment of time-dependent degradation of material properties due to temperature and nuclear irradiation, and the use of time-independent finite element stress analysis results to perform a simplified creep-fatigue analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStructural Analysis of an LMFBR Shield Assembly Duct Under Thermo-Mechanical and Seismic Loads
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264763
dc.journal.fristpage151
dc.journal.lastpage157
dc.identifier.eissn1528-8978
dc.keywordsStructural analysis
dc.keywordsManufacturing
dc.keywordsStress
dc.keywordsDucts
dc.keywordsLiquid metal fast breeder reactors
dc.keywordsStress analysis (Engineering)
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsStructural design
dc.keywordsThermal stresses
dc.keywordsIrradiation (Radiation exposure)
dc.keywordsMaterials properties
dc.keywordsDesign
dc.keywordsFinite element analysis
dc.keywordsInelastic analysis
dc.keywordsMaterials degradation
dc.keywordsFinite element model
dc.keywordsRivers
dc.keywordsBreeder reactors AND Temperature gradients
dc.treeJournal of Pressure Vessel Technology:;1986:;volume( 108 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record