Show simple item record

dc.contributor.authorR. L. Roche
dc.contributor.authorB. Autrusson
dc.date.accessioned2017-05-08T23:23:13Z
dc.date.available2017-05-08T23:23:13Z
dc.date.copyrightMay, 1986
dc.date.issued1986
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28269#138_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101574
dc.description.abstractSixteen torispherical heads were tested under internal pressure. These heads, which were 500 mm in diameter, had diameter/thickness ratios ranging from 330 to 1000. They were all prepared by spinning mild steel plates. Deflections along the axis and in the knuckle area were recorded. The most practical result is the buckling pressure and this can be exceeded without fracturing the head. The tests show that the buckling pressure is relatively unaffected by geometric imperfections. These experimental results are used to assess the validity of the different plastic bifurcation analysis methods. Five different methods were employed using the CASTEM general-purpose computer program. The method based on the incremental theory of plasticity proved to be incapable of correctly predicting head buckling. If this method is modified by replacing the elastic shear modulus by the secant modulus, the results obtained show good agreement with experimental results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Tests on Buckling of Torispherical Heads and Methods of Plastic Bifurcation Analysis
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264761
dc.journal.fristpage138
dc.journal.lastpage145
dc.identifier.eissn1528-8978
dc.keywordsBifurcation
dc.keywordsBuckling
dc.keywordsPressure
dc.keywordsPlasticity
dc.keywordsSteel
dc.keywordsSpin (Aerodynamics)
dc.keywordsFracture (Process)
dc.keywordsPlates (structures)
dc.keywordsComputer software
dc.keywordsDeflection
dc.keywordsShear modulus AND Thickness
dc.treeJournal of Pressure Vessel Technology:;1986:;volume( 108 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record