Show simple item record

dc.contributor.authorJ. M. Bloom
dc.date.accessioned2017-05-08T23:23:09Z
dc.date.available2017-05-08T23:23:09Z
dc.date.copyrightNovember, 1986
dc.date.issued1986
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28277#485_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101528
dc.description.abstractApproximate closed-form J -integral expressions based on the estimation scheme for use in the Deformation Plasticity Failure Assessment Diagram (DPFAD) approach are presented for an axially oriented semi-elliptical flaw in a pressurized cylinder for crack depth to wall thickness ratios, a/t , from 1/4 to 3/4 and aspect ratios, a/l , from 0 to 1/2. The DPFAD approach was used to derive closed-form J -integral expressions from limited elastic-plastic finite element solutions. Results are also presented in terms of the DPFAD curves as functions of a/t and a/l for the strain-hardening exponent of n = 8.6. Curves are given for the calibration constant h 1 as a function of a/t and a/l for ease of interpolation. Lastly, discussion is provided as to the applicability of the solutions and a possible interpolation scheme for obtaining h 1 values for n other than 8.6.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExtensions of the Failure Assessment Diagram Approach Semi-Elliptical Flaw in Pressurized Cylinders—Part II
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264817
dc.journal.fristpage485
dc.journal.lastpage489
dc.identifier.eissn1528-8978
dc.keywordsCylinders
dc.keywordsFailure
dc.keywordsInterpolation
dc.keywordsWall thickness
dc.keywordsWork hardening
dc.keywordsFunctions
dc.keywordsPlasticity
dc.keywordsDeformation
dc.keywordsFracture (Materials)
dc.keywordsFinite element analysis AND Calibration
dc.treeJournal of Pressure Vessel Technology:;1986:;volume( 108 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record