Show simple item record

dc.contributor.authorH. Fessler
dc.contributor.authorC. Pappalettere
dc.date.accessioned2017-05-08T23:23:08Z
dc.date.available2017-05-08T23:23:08Z
dc.date.copyrightNovember, 1986
dc.date.issued1986
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28277#430_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101519
dc.description.abstractA 12-mm-thick plate representing a vessel wall and two others representing attachments on the “inside” and “outside” (forming a symmetrical cross) are jointed by 12-mm, full penetration fillet welds. The attachment plates are in shear and bending; the vessel wall is in tension. Full-size, frozen-stress, photoelastic models of a real weld and four simplified shapes have been made, tested and analyzed to determine surface stresses and their directions in the attachment plate and in the fillet welds. Two-dimensional SCFs for the (horizontal) cross section in tension give safe overestimates of measured peak bending stresses. The directions of the fillet stresses are generally within 20 deg of expected values.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFillet Welds Under Bending and Shear
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264809
dc.journal.fristpage430
dc.journal.lastpage435
dc.identifier.eissn1528-8978
dc.keywordsShear (Mechanics)
dc.keywordsWelded joints
dc.keywordsStress
dc.keywordsTension
dc.keywordsVessels
dc.keywordsSymmetry (Physics)
dc.keywordsBending (Stress)
dc.keywordsPlates (structures) AND Shapes
dc.treeJournal of Pressure Vessel Technology:;1986:;volume( 108 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record