Show simple item record

dc.contributor.authorT. A. Prater
dc.contributor.authorW. R. Catlin
dc.contributor.authorL. F. Coffin
dc.date.accessioned2017-05-08T23:22:39Z
dc.date.available2017-05-08T23:22:39Z
dc.date.copyrightJanuary, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26908#2_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101253
dc.description.abstractThis paper reports on a study of surface crack growth of two nuclear structural steels, SA333 Gr6 carbon steel used for piping and SA533 Grade B pressure vessel steel, both tested under cyclic loads in 288°C (550°F), 0.2 ppm oxygen water at 10.34 MPa (1500 psi). Results are compared with tests on compact type (CT) specimen geometries tested in similar environments. It was found that, for the frequencies employed, the crack growth rates for the two specimen geometries were not widely different, despite the high net mean stresses employed in the surface crack geometries. However, substantial differences were noted in the crack velocity response under static loading for the two geometries, suggesting that such differences can be expected in low frequency loading more typical of service conditions, raising questions about the applicability of CT geometry test results for the materials, temperatures and environments used in this study. Temperature effects, air environments and R-value effects for surface crack geometries are also reported.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSurface Crack Growth Behavior of Structural Metals in High Temperature Water Environments
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225837
dc.journal.fristpage2
dc.journal.lastpage9
dc.identifier.eissn1528-8889
dc.keywordsStructural metals
dc.keywordsSurface cracks
dc.keywordsWater
dc.keywordsHigh temperature
dc.keywordsFracture (Materials)
dc.keywordsStress
dc.keywordsStructural steel
dc.keywordsTemperature effects
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsPressure vessels
dc.keywordsCarbon steel
dc.keywordsPipes
dc.keywordsFrequency
dc.keywordsGeometry AND Oxygen
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record