Show simple item record

dc.contributor.authorHuseyin Sehitoglu
dc.contributor.authorM. Karasek
dc.date.accessioned2017-05-08T23:22:39Z
dc.date.available2017-05-08T23:22:39Z
dc.date.copyrightApril, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26909#192_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101251
dc.description.abstractDeformation and damage behavior of a 1070 steel (class U wheel steel) under thermo-mechanical and isothermal loading have been examined. Fatigue lives under thermo-mechanical and isothermal loading were compared for similar conditions of strain and temperature. For most cases, maximum tensile stresses developed in thermo-mechanical tests exceeded those obtained under isothermal conditions (at Tmin ) for the same strain amplitude. Cyclic hardening was observed at 200 to 300°C in isothermal tests. Under thermo-mechanical loading, static strain aging resulted in added hardening due to alternate exposure of the material to high and low temperatures. When thermal recovery effects become dominant at the high temperature end, strengthening upon cooling was suppressed. Oxide scales readily formed at high temperatures (≥400°C) and resulted in an increase in damage accumulation rates. Oxygen penetration into crack flanks and the ensuing loss of carbon was identified using Auger spectroscopy. The severity of oxide penetration into the base metal increased with increase in surface crack density, longer oxidation times and higher temperatures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleObservations of Material Behavior Under Isothermal and Thermo-Mechanical Loading
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225860
dc.journal.fristpage192
dc.journal.lastpage198
dc.identifier.eissn1528-8889
dc.keywordsDensity
dc.keywordsDeformation
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsCooling
dc.keywordsSteel
dc.keywordsSpectroscopy
dc.keywordsAugers
dc.keywordsHardening
dc.keywordsBase metals
dc.keywordsFracture (Materials)
dc.keywordsCarbon
dc.keywordsLow temperature
dc.keywordsoxidation
dc.keywordsOxygen
dc.keywordsSurface cracks
dc.keywordsTension
dc.keywordsHigh temperature AND Wheel steel
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record