Show simple item record

dc.contributor.authorS. Murakami
dc.contributor.authorY. Sanomura
dc.contributor.authorK. Saitoh
dc.date.accessioned2017-05-08T23:22:39Z
dc.date.available2017-05-08T23:22:39Z
dc.date.copyrightApril, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26909#167_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101247
dc.description.abstractThe present paper is concerned with the modelling of creep and creep damage in polycrystalline metals and the experimental evaluation of the proposed model. By ascribing the reduction of creep rates caused by the principal stress rotation (i.e., cross-hardening) to the intersection mechanism of dislocations on active slip planes in crystal grains, a constitutive equation of creep describing the cross-hardening is first formulated. Then, in view of the metallurgical observations on the nucleation and the growth of grain boundary cavities in the creep damage process, an evolution equation of anisotropic creep damage is expressed as a function of the stress, a second rank damage tensor and the creep rate of the material. Finally, the validity of the proposed theory is discussed by performing systematic creep damage tests of thin-walled copper tubes under nonsteady multiaxial states of stress at 250°C.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFormulation of Cross-Hardening in Creep and its Effect on the Creep Damage Process of Copper
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225856
dc.journal.fristpage167
dc.journal.lastpage173
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsCopper
dc.keywordsHardening
dc.keywordsStress
dc.keywordsEquations
dc.keywordsMechanisms
dc.keywordsRotation
dc.keywordsNucleation (Physics)
dc.keywordsIntersections
dc.keywordsTensors
dc.keywordsModeling
dc.keywordsCavities
dc.keywordsDislocations
dc.keywordsGrain boundaries
dc.keywordsCrystals AND Metals
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record