Show simple item record

dc.contributor.authorD. Rittel
dc.contributor.authorM. Bercovier
dc.contributor.authorI. Roman
dc.date.accessioned2017-05-08T23:22:38Z
dc.date.available2017-05-08T23:22:38Z
dc.date.copyrightApril, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26909#159_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101244
dc.description.abstractSintered tungsten base heavy alloys made of tungsten grains embedded in a nickel rich matrix can possess low room temperature ductility that may be improved by subsequent heat treatment. The sintering thermal cycle was simulated by a finite element procedure, and it was found that the vast differences in thermal and elastic properties of the microstructural components result in significant residual interfacial strains upon cooling to ambient temperature. These strains may contribute significantly to the low room temperature ductility of this class of liquid phase sintered alloys and should be relieved in order to improve ductility.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Finite Element Modelling of Embrittlement in Composite Liquid Phase Sintered Heavy Alloys
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225854
dc.journal.fristpage159
dc.journal.lastpage162
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsAlloys
dc.keywordsFinite element analysis
dc.keywordsModeling
dc.keywordsEmbrittlement
dc.keywordsTemperature
dc.keywordsDuctility
dc.keywordsTungsten
dc.keywordsCycles
dc.keywordsElasticity
dc.keywordsCooling
dc.keywordsNickel
dc.keywordsSintering AND Heat treating (Metalworking)
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record