Show simple item record

dc.contributor.authorStaffan Söderberg
dc.contributor.authorTodd Colvin
dc.contributor.authorKamel Salama
dc.contributor.authorOlof Vingsbo
dc.date.accessioned2017-05-08T23:22:38Z
dc.date.available2017-05-08T23:22:38Z
dc.date.copyrightApril, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26909#153_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101243
dc.description.abstractThe fretting wear characteristics of a low-carbon steel (AISI 1018) at a 20 kHz ultrasonic testing frequency have been studied. The tests show that after an initial running-in period there exists a linear relationship between wear volume and number of cycles. Fretting wear is also found to increase exponentially with load and amplitude, the effect of load being the strongest within the studied range. By comparing obtained wear data and observed wear mechanism with results in literature from low-frequency fretting of the same material, it is found that a similar behavior is obtained in spite of the large difference in frequency. These results suggest that ultrasonic fretting can be utilized as an accelerated method for fretting wear testing.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUltrasonic Fretting Wear of a Plain Carbon Steel
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225853
dc.journal.fristpage153
dc.journal.lastpage158
dc.identifier.eissn1528-8889
dc.keywordsCarbon steel
dc.keywordsWear
dc.keywordsStress
dc.keywordsUltrasonic testing
dc.keywordsCarbon
dc.keywordsCycles
dc.keywordsWear testing
dc.keywordsMechanisms AND Steel
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record