Show simple item record

dc.contributor.authorShaik Jeelani
dc.contributor.authorJ. A. Bailey
dc.date.accessioned2017-05-08T23:22:38Z
dc.date.available2017-05-08T23:22:38Z
dc.date.copyrightApril, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26909#93_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101233
dc.description.abstractA novel electrolytic etching technique is used to determine the residual stress distribution in the machining of annealed 18 percent nickel maraging steel. Ring shaped specimens were machined under unlubricated orthogonal conditions with carbide cutting tools having wear lands of 0.125, 0.25, and 0.5 mm length at cutting speeds ranging between 0.05 and 1.60 ms−1 . The results of the investigation show that the residual stresses are tensile at the machined surface and decrease with an increase in depth beneath the machined surface. The maximum (near surface) residual stress and depth of the severely stressed region increase with an increase in cutting speed and tool wear land length. The results are interpreted in terms of the variations in the amount of surface region deformation produced by changes in cutting conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stress Distribution in Machining Annealed 18 Percent Nickel Maraging Steel
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225865
dc.journal.fristpage93
dc.journal.lastpage98
dc.identifier.eissn1528-8889
dc.keywordsNickel
dc.keywordsMachining
dc.keywordsSteel
dc.keywordsStress concentration
dc.keywordsCutting
dc.keywordsWear
dc.keywordsDeformation
dc.keywordsEtching
dc.keywordsResidual stresses
dc.keywordsStress AND Carbide cutting tools
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record