Show simple item record

dc.contributor.authorN. Triantafyllidis
dc.contributor.authorShyam K. Samanta
dc.contributor.authorB. Maker
dc.date.accessioned2017-05-08T23:22:35Z
dc.date.available2017-05-08T23:22:35Z
dc.date.copyrightOctober, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26912#321_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101200
dc.description.abstractThe development of a one-dimensional finite strain elasto-plastic shell model appropriate for use in modelling straight drawbeads is outlined. Numerical results obtained using a finite element technique are shown for practical bead designs. The sheet deformation is divided into two phases: that when the binder locks the sheet metal to form the bead, and that when the punch advances to form the panel, pulling the sheet and (possibly) drawing material through the bead. The effects of friction coefficient, bead geometry, and material properties are investigated, resulting in strain distribution diagrams and force-displacement curves for several bead designs.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Analysis of Drawbeads in Sheet Metal Forming: Part I—Problem Formulation
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225889
dc.journal.fristpage321
dc.journal.lastpage327
dc.identifier.eissn1528-8889
dc.keywordsForce
dc.keywordsDeformation
dc.keywordsFriction
dc.keywordsBinders (Materials)
dc.keywordsSheet metal
dc.keywordsSheet metal work
dc.keywordsMaterials properties
dc.keywordsFinite element analysis
dc.keywordsModeling
dc.keywordsDisplacement
dc.keywordsGeometry AND Shells
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record