Show simple item record

dc.contributor.authorH. Saghizadeh
dc.contributor.authorC. K. H. Dharan
dc.date.accessioned2017-05-08T23:22:35Z
dc.date.available2017-05-08T23:22:35Z
dc.date.copyrightOctober, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26912#290_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101196
dc.description.abstractThe delamination fracture toughness of graphite and aramid-epoxy composite laminates was determined as a function of loading rate for unidirectional and woven reinforcements. In addition, the in-situ fracture toughness of the epoxy matrix was obtained by determining the crack energy release rate during the delamination fracture of thin epoxy films. The fracture surfaces were investigated using scanning electron microscopy. The results show that increasing the loading rate and the use of woven reinforcements increase the fracture toughness. A model was used to estimate the relative contributions from the fiber-matrix interface and the matrix to the overall delamination crack energy release rate.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDelamination Fracture Toughness of Graphite and Aramid Epoxy Composites
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225885
dc.journal.fristpage290
dc.journal.lastpage295
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsEpoxy adhesives
dc.keywordsFracture toughness
dc.keywordsGraphite
dc.keywordsDelamination
dc.keywordsFracture (Process)
dc.keywordsScanning electron microscopy
dc.keywordsFibers AND Laminates
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record