Show simple item record

dc.contributor.authorG. A. Kardomateas
dc.date.accessioned2017-05-08T23:22:34Z
dc.date.available2017-05-08T23:22:34Z
dc.date.copyrightOctober, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26912#285_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101195
dc.description.abstractAsymmetries like welds or shoulders, may eliminate one of the two shear zones of symmetrically fully plastic cracked parts and thus give crack propagation along the remaining active slip band through pre-strained material instead of through the relatively unstrained region between two shear bands of the symmetric case. One thus expects a reduced ductility in the single shear band asymmetric case. A macro-mechanical analysis provides a physical basis for explaining the development of deformation in both geometries, as observed from tests on several alloys. The asymmetric case is approximated as Mode II shearing, with the crack extension occurring by sliding off along a single slip plane and fracture. In the symmetric Mode I case, the crack is assumed to extend by alternating shear on two symmetric slip planes and fracture.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMacro-Mechanical Analysis for Symmetric and Asymmetric Fully Plastic Crack Growth
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225884
dc.journal.fristpage285
dc.journal.lastpage289
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsAlloys
dc.keywordsShear (Mechanics)
dc.keywordsDuctility
dc.keywordsWelded joints
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsCrack propagation AND Shearing
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record