Show simple item record

dc.contributor.authorMasao Sakane
dc.contributor.authorMasateru Ohnami
dc.date.accessioned2017-05-08T23:22:34Z
dc.date.available2017-05-08T23:22:34Z
dc.date.copyrightOctober, 1986
dc.date.issued1986
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26912#279_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101194
dc.description.abstractThis paper describes the notch effect in low-cycle fatigue of an austenitic stainless steel SUS 304 at 873 K in air. Total strain range-controlled tests were carried out using a round unnotched and three round notched specimens. A prediction method for low-cycle fatigue lives of notched specimens was developed by predicting the crack initiation and propagation periods separately. To predict the former Neuber’s rule was applied and a nominal stress/strain criterion was developed to predict the latter. Failure lives, obtained by adding the two prediction lives, closely agree with observed failure lives.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNotch Effect in Low-Cycle Fatigue at Elevated Temperatures—Life Prediction From Crack Initiation and Propagation Considerations
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225883
dc.journal.fristpage279
dc.journal.lastpage284
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsFracture (Materials)
dc.keywordsLow cycle fatigue
dc.keywordsFailure
dc.keywordsStress AND Stainless steel
dc.treeJournal of Engineering Materials and Technology:;1986:;volume( 108 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record