• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Comparison of Hydraulic Fracture Models for Highly Elongated Fractures of Variable Height

    Thumbnail
    View/Open
    JERTD2-26411#107_1.pdf (898.0Kb)
    Date
    1986
    Author
    I. D. Palmer
    C. T. Luiskutty
    Metadata
    Show full item record
    Abstract
    There is a pressing need to compare and evaluate hydraulic fracture models which are now being used by industry to predict variable fracture height. The fractures of concern here are vertical fractures which have a pronounced elongation in the direction of the payzone, i.e., there is a dominant one-dimensional fluid flow along the payzone direction. A summary is given of the modeling entailed in the basic ORU fracture model, which calculates fracture height as a function of distance from the wellbore in the case of a continuous sand bounded by zones of higher (but equal) minimum in-situ stress. The elastic parameters are assumed the same in each layer, and injected flow rates and fluid parameters are taken to be constant. Leak-off is included with spurt loss, as well as non-Newtonian flow. An advantage of the model is its small computer run time. Predictions for wellbore height and pressure from the ORU model are compared separately with the AMOCO and MIT pseudo-3D models. In one instance of high stress contrast the ORU wellbore pressure agrees fairly well with the AMOCO model, but the AMOCO wellbore height is greater by 32 percent. Comparison between the ORU and MIT models in two cases (also high stress contrast) indicates height disagreement at the wellbore by factors of 1.5–2.5 with the MIT model giving a lower height. Thus it appears there can be substantial discrepancies between all three models. Next we compare the ORU model results with six cases of elongated fractures from the TERRA-TEK fully-3D model. Although two of these cases are precluded due to anomolous discrepancies, the other four cases show reasonable agreement. We make a critical examination of assumptions that differ in all the models (e.g., the effective modulus-stiffness multiplier approximation in the AMOCO model, the effect of finite fluid flow in the vertical direction in the MIT model, and the effect of 2D flow and limited perforated height in the TERRA-TEK model). Suggestions are made for reconciling some of the discrepancies between the various models. For example, the ORU/AMOCO height discrepancy appears to be resolved; for other discrepancies we have no explanation. Our main conclusion is that the AMOCO, TERRA-TEK and ORU models for fracture height and bottomhole pressure are in reasonable agreement for highly elongated fractures. Despite the difficulties in understanding the different models, the comparisons herein are an encouraging first step towards normalizing these hydraulic fracture models.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/101037
    Collections
    • Journal of Energy Resources Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV