Show simple item record

dc.contributor.authorC. L. Hough
dc.contributor.authorB. Das
dc.contributor.authorT. G. Rozgonyi
dc.date.accessioned2017-05-08T23:22:14Z
dc.date.available2017-05-08T23:22:14Z
dc.date.copyrightDecember, 1986
dc.date.issued1986
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26414#310_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101014
dc.description.abstractMathematical models for bit life of polycrystalline diamond compact (PDC) drill bits were developed for drilling small holes in hard abrasive media. Based on the wear-out criterion of an average 0.060 in. (1.5 mm) flank wear land, bit life equations were formulated in three forms: bit life versus rotary speed and feed rate, bit life versus rotary speed and penetration rate, and wear rate versus cutting speed and cutter engagement area. The traditional linear-logarithmic model proved inadequate to describe bit life, whereas the quadratic-logarithmic model provided the best bit life prediction equation. Consequently, it would be possible to predict the optimum economical drilling conditions more accurately by employing a quadratic-logarithmic based bit life equation. The equation demonstrated the ability to predict the bit life precisely under different modes of wear.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLife Models for Small-Diameter Polycrystalline Diamond Compact Bits in Hard Abrasive Media
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231282
dc.journal.fristpage310
dc.journal.lastpage314
dc.identifier.eissn1528-8994
dc.keywordsWear
dc.keywordsDrilling
dc.keywordsBits (Tools)
dc.keywordsCutting
dc.keywordsDiamonds
dc.keywordsEquations AND Polycrystalline diamond compact bits
dc.treeJournal of Energy Resources Technology:;1986:;volume( 108 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record