Show simple item record

dc.contributor.authorR. S. Amano
dc.date.accessioned2017-05-08T23:22:14Z
dc.date.available2017-05-08T23:22:14Z
dc.date.copyrightDecember, 1986
dc.date.issued1986
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26414#286_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/101009
dc.description.abstractA numerical study is reported on the turbulent jet flowing into closed tubes. In the computation the finite volume method is employed to solve the continuity and momentum equations with the use of the second-order closure model of turbulence. The computations were made for tube depths and tube widths ranging from 2 to 30 jet diameters and from 2 to 8 jet diameters, respectively. The computed decay of the jet centerline velocity agrees reasonably well with the experimental data (within 10 percent). With the use of the second-order closure model, it became clear that an isotropic assumption is still valid in the main mixing region in the tube. Moreover, the wall shear stress distributions were obtained along the side wall of a tube. Finally, it was found that the terminal stagnation pressure at the tube bottom depends strongly on the diameter of the tube for D T /D N of less than 5.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Numerical Study of Turbulent Axisymmetric Jets Flowing Into Closed Tubes
dc.typeJournal Paper
dc.journal.volume108
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231278
dc.journal.fristpage286
dc.journal.lastpage291
dc.identifier.eissn1528-8994
dc.keywordsTurbulence
dc.keywordsJets
dc.keywordsComputation
dc.keywordsEquations
dc.keywordsFinite volume methods
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsPressure AND Momentum
dc.treeJournal of Energy Resources Technology:;1986:;volume( 108 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record