Show simple item record

dc.contributor.authorR. Viswanathan
dc.date.accessioned2017-05-08T23:20:59Z
dc.date.available2017-05-08T23:20:59Z
dc.date.copyrightAugust, 1985
dc.date.issued1985
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28258#218_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/100268
dc.description.abstractThe basic causes of dissimilar metal weld (DMW) failures in boilers are now well understood. Guidelines have emerged for achieving significantly improved DMW life, in terms of operational parameters, weld filler metals, and weld designs. Analytical, as well as experimental, nondestructive techniques have been developed that enable assessment of the condition of DMWs in service so that intelligent run-replace decisions can be made. Techniques for assessing the remaining life of superheater/reheater (SH/RH) tubes are under development. The techniques utilize information on steamside oxide scale growth and dimensional changes on the fireside due to corrosion to compile the temperature–stress profile of operation in the tubes. This information is then combined with standard creep data to estimate the remaining life of the tubes more accurately than was possible heretofore. The potential of a replication technique that allows nondestructive monitoring of creep damage in heavy section pipes has been successfully demonstrated at several utility sites. It has been possible to detect early stages of incipient creep damage and to recommend specific courses of action to affected utilities. Laboratory and field studies currently in progress are expected to result in metallographic and miniature test specimen techniques that would further augment the capabilities of the replication technique, and render it into a more quantitative tool for life assessment of heavy section components.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDissimilar Metal Weld and Boiler Creep Damage Evaluation for Plant Life Extension
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264439
dc.journal.fristpage218
dc.journal.lastpage225
dc.identifier.eissn1528-8978
dc.keywordsMetals
dc.keywordsCreep
dc.keywordsBoilers
dc.keywordsLife extension
dc.keywordsIndustrial plants
dc.keywordsPipes
dc.keywordsFailure
dc.keywordsFiller metals
dc.keywordsCorrosion
dc.keywordsTemperature
dc.keywordsPublic utilities
dc.keywordsStress AND Superheaters
dc.treeJournal of Pressure Vessel Technology:;1985:;volume( 107 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record