Show simple item record

contributor authorGiordano
contributor authorTeza
contributor authorArianna
contributor authorPesci
contributor authorAndrea
contributor authorNinfo
date accessioned2017-05-08T22:34:27Z
date available2017-05-08T22:34:27Z
date copyrightAugust 2016
date issued2016
identifier other50027545.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/82904
description abstractTerrestrial laser scanning (TLS) and structure-from-motion photogrammetry (SfM) can both provide dense and accurate point clouds. Therefore, they can be used to perform a morphological analysis of the façades of a masonry building, which relies on evaluation of the differences between the point cloud and a reference regular surface fitted to it. To compare TLS and SfM performance in morphological analysis, multimodal surveys were carried out on the square cross-section, 48-m-high Garisenda Tower in Bologna, Italy (reference surface: plane), and the circle cross-section, 42-m-high Caorle’s leaning bell tower in Venice, Italy (reference surface: moving cylinder). The results show that the TLS- and SfM-based morphologies are qualitatively the same, and the relative differences are lower than 10%–20% under the condition that the viewpoint positions (VPs) are optimal. Also, the overall geometries are correctly described by both the techniques. The main conclusion is that, if no particular constraints exist (e.g., unavoidable suboptimal VPs, night surveys are needed, or trees hide the surface), TLS and SfM have similar performance in morphological analysis.
publisherAmerican Society of Civil Engineers
titleMorphological Analysis for Architectural Applications: Comparison between Laser Scanning and Structure-from-Motion Photogrammetry
typeJournal Paper
journal volume142
journal issue3
journal titleJournal of Surveying Engineering
identifier doi10.1061/(ASCE)SU.1943-5428.0000172
treeJournal of Surveying Engineering:;2016:;Volume ( 142 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record