Show simple item record

contributor authorS. Fothergill
contributor authorD. S. Mavinic
date accessioned2017-05-08T22:18:25Z
date available2017-05-08T22:18:25Z
date copyrightMay 2000
date issued2000
identifier other40180529.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/76989
description abstractVolatile fatty acids (VFA) are a principal carbon substrate used in biological nutrient removal processes, and an increase in their concentration can enhance process performance. In the autothermal thermophilic aerobic digestion (ATAD) of primary sludge, a reduction in both aeration and retention time had been reported to enhance VFA production. However, smaller wastewater treatment plants, which are suitable for ATAD, often combine sludge in a single digestion process for convenience. Consequently, research was undertaken to determine if a mixture of primary and secondary sludge would increase VFA production, compared to primary sludge alone, in the first stage of ATAD. Secondary sludge was predicted to further enhance VFA production by providing the required substrate “prepackaged” in the correct ratios. The results illustrated that the incorporation of secondary sludge into the primary sludge feed resulted in increased production and accumulation of VFA. The greatest production and accumulation were produced with the digestion of 100% secondary sludge. In addition, analysis of nutrient species confirmed that the mixing of primary and secondary sludge, as well as the ATAD of mixed and secondary sludge, results in the release of stored phosphorus and an increase in ammonia nitrogen.
publisherAmerican Society of Civil Engineers
titleVFA Production in Thermophilic Aerobic Digestion of Municipal Sludges
typeJournal Paper
journal volume126
journal issue5
journal titleJournal of Environmental Engineering
identifier doi10.1061/(ASCE)0733-9372(2000)126:5(389)
treeJournal of Environmental Engineering:;2000:;Volume ( 126 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record