Show simple item record

contributor authorLeonardo S. Nanía
contributor authorArturo S. León
contributor authorMarcelo H. García
date accessioned2017-05-08T22:08:07Z
date available2017-05-08T22:08:07Z
date copyrightMay 2015
date issued2015
identifier other31592053.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/72042
description abstractA one-dimensional (1D) hydrologic-hydraulic model for simulating dual drainage in urban areas is presented. It consists of four modules: (1) rainfall-runoff transformation, (2) 1D flow routing on a street network, (3) flow interception at street inlets, and (4) flow interaction between surface water on the streets and the underground storm-water system by interfacing with the EPA-SWMM5 engine (U.S. Environmental Protection Agency-Storm Water Management Model). The hydrologic model (first module) transforms rainfall to runoff using the kinematic wave approximation and simulates the infiltration process with the Green-Ampt method. The street network model (second module) is based on a finite-volume shock-capturing scheme that solves the fully conservative Saint-Venant equations and can be used to model both subcritical and supercritical flows. The inlet model (third module) computes the amount of water intercepted by inlets. The formulation of boundary conditions at the street crossings is generalized and can be used for any number of streets, any combination of inflowing and outflowing streets, and flow regime (e.g., subcritical and supercritical flows). Flow interaction between surface water on the streets and underground storm-water system is achieved by interfacing the proposed model with EPA-SWMM5. This interaction allows flow to enter from streets to the underground storm-water system and vice versa. The proposed model has several potential applications such as the identification of critical zones for flooding (e.g., zones with high water depths and flow velocities) in urban developments and can be used to take appropriate measures for drainage control (e.g., to increase number and/or size of inlets), to determine the consequences of different degrees of inlet clogging, and to assess flooding hazards through the application of suitable hazard criteria. A summary of criteria used for storm-water hazard assessment is presented. To demonstrate the dual-drainage model’s potential, an application is performed in a catchment of the metropolitan area of Chicago, Illinois. The results obtained are promising and show that the model can be a useful tool for storm-water management and flooding hazard assessment in urban areas.
publisherAmerican Society of Civil Engineers
titleHydrologic-Hydraulic Model for Simulating Dual Drainage and Flooding in Urban Areas: Application to a Catchment in the Metropolitan Area of Chicago
typeJournal Paper
journal volume20
journal issue5
journal titleJournal of Hydrologic Engineering
identifier doi10.1061/(ASCE)HE.1943-5584.0001080
treeJournal of Hydrologic Engineering:;2015:;Volume ( 020 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record