Show simple item record

contributor authorE. Creaco
contributor authorM. Franchini
contributor authorT. M. Walski
date accessioned2017-05-08T22:03:49Z
date available2017-05-08T22:03:49Z
date copyrightMay 2014
date issued2014
identifier other%28asce%29wr%2E1943-5452%2E0000409.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/70221
description abstractThe traditional optimization approach for water distribution mains is that of considering a single design scenario with prefixed nodal demands representing the peak values at the end of the life cycle of the construction. Instead, this paper presents a different approach for the design of water distribution mains aimed at considering the phasing of construction. It makes it possible to identify, on prefixed time steps or intervals (for instance 25 years), the upgrade of the construction rendering the network able to satisfy, during the expected life of the system, growing nodal demands related to the increment in the population served. To show the benefits of this approach in comparison to using a single design flow, an optimization methodology, aimed at introducing new pipes in the network as needed at each time step, was set up and applied to a simple case study, where two different scenarios were considered concerning the growth of the network. Results showed that this approach is able to yield better results when compared with the single flow design, because it enables short-term construction upgrades to be performed while keeping a vision of the expected long term network growth.
publisherAmerican Society of Civil Engineers
titleAccounting for Phasing of Construction within the Design of Water Distribution Networks
typeJournal Paper
journal volume140
journal issue5
journal titleJournal of Water Resources Planning and Management
identifier doi10.1061/(ASCE)WR.1943-5452.0000358
treeJournal of Water Resources Planning and Management:;2014:;Volume ( 140 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record