Show simple item record

contributor authorJulie C. Padowski
contributor authorErin A. Rothfus
contributor authorJames W. Jawitz
contributor authorHarald Klammler
contributor authorKirk Hatfield
contributor authorMichael D. Annable
date accessioned2017-05-08T21:48:34Z
date available2017-05-08T21:48:34Z
date copyrightDecember 2009
date issued2009
identifier other%28asce%29he%2E1943-5584%2E0000145.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/62992
description abstractStandard methods for determining pollutant loads in streams typically require the collection of separate instantaneous measurements of water velocities and solute concentrations at discrete points in space and time. A recently developed device, the passive surface water flux meter (PSFM), has been introduced as an alternate method for the measurement of time-integrated surface water flux (velocity) and solute mass flux. This paper extends PSFM development by evaluating and comparing two PSFM designs in laboratory flumes, as well as reporting on initial steady-state field testing. The shape of the PSFM body determines the velocity with which water passes through the device, and different designs may thus be preferred for different applications. Experiments compared the accuracy of flux measurement by the previously introduced hydrofoil-shaped PSFM and nitrate-sorbing cartridge with that of a newly designed cylindrical-shaped PSFM and phosphate-sorbing cartridges. Testing was performed in a laboratory flume at steady water velocities between 0.2–0.58 m/s and results verified the ability of the new PSFM designs to accurately measure solute and water flux under steady-state conditions. Water fluxes were measured to be within 4 and 7% of true water fluxes for the hydrofoil PSFM and cylindrical PSFM, respectively. The accuracy of solute flux estimates was similar to those found in the water flux experiments. While both PSFM designs exhibited similar accuracy, the cylindrical-shaped PSFM with phosphate-sorbing cartridges was chosen for field testing because of the relative ease of construction compared to the hydrofoil-shaped device. Field experiments performed under natural steady-flow stream velocities in Sweetwater Branch, Gainesville, Florida indicated that in relatively stable field conditions, the cylindrical PSFM was able to accurately measure water and phosphate mass fluxes to within 3 and 7% of true fluxes, respectively.
publisherAmerican Society of Civil Engineers
titleEffect of Passive Surface Water Flux Meter Design on Water and Solute Mass Flux Estimates
typeJournal Paper
journal volume14
journal issue12
journal titleJournal of Hydrologic Engineering
identifier doi10.1061/(ASCE)HE.1943-5584.0000127
treeJournal of Hydrologic Engineering:;2009:;Volume ( 014 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record