Show simple item record

contributor authorJ. Chu
contributor authorS. W. Yan
date accessioned2017-05-08T21:31:50Z
date available2017-05-08T21:31:50Z
date copyrightJune 2005
date issued2005
identifier other%28asce%291532-3641%282005%295%3A2%28158%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/55004
description abstractThe degree of consolidation is usually used as one of the criteria for assessing the effectiveness of soil improvement work using the fill surcharge or vacuum preloading method. It is also often used as a design specification in a soil improvement contract. Degree of consolidation is normally calculated using settlement data. However, as the effect of vacuum preloading is controlled largely by pore water pressure changes, it is necessary to analyze the pore water pressure variations and to assess the degree of consolidation using pore water pressures. In this paper, the problems involved in the estimation of degree of consolidation using settlement data are discussed. A method to estimate the average degree of consolidation using pore water pressure data is suggested. Two case studies are presented to examine the characteristics of the pore water pressure variation of soil under vacuum loading. The degree of consolidation achieved in each of the two cases is assessed using pore water pressure data and compared with that estimated using settlement data. Factors affecting the degree of consolidation assessment are discussed.
publisherAmerican Society of Civil Engineers
titleEstimation of Degree of Consolidation for Vacuum Preloading Projects
typeJournal Paper
journal volume5
journal issue2
journal titleInternational Journal of Geomechanics
identifier doi10.1061/(ASCE)1532-3641(2005)5:2(158)
treeInternational Journal of Geomechanics:;2005:;Volume ( 005 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record