Moment Redistribution in FRP and Steel-Plated Reinforced Concrete Beams

Abstract

Research on retrofitting reinforced concrete (RC) beams and slabs using externally bonded (EB) fiber reinforced polymer (FRP) or steel plates has reached the stage where the flexural strength can be determined with confidence. Research has also shown that EB plated structures tend to debond at relatively low strains and to such an extent that guidelines often preclude moment redistribution which can severely restrict the use of plating. However, recent research on retrofitting using FRP and steel near surface mounted plates (NSM) has shown that NSM plates tend to debond at high strains which can allow substantial amounts of moment redistribution. A moment redistribution approach has been developed for both NSM and EB plated beams that allows for the wide range of debonding strains that can occur. This allows RC beams to be retrofitted for both strength and ductility which should help expand the use of this convenient and inexpensive form of retrofitting.