Ambient Vibration Monitoring of a Highway Bridge Undergoing a Destructive Test

Abstract

Developing a technique to continuously monitor in-service highway bridges is one of the major research focuses at the Connecticut Department of Transportation and the University of Connecticut. The goal has been to use ambient traffic loading as the force to excite a measurable parameter that is sensitive to overall structural integrity. In this study, the dynamic responses of a full-scale steel-girder highway bridge during the passage of a small truck were measured using a number of sensors that could be reasonably implemented on a network of in-service bridges. Measurements were taken before and during the staged introduction of a simulated crack in one of the main supporting girders. The crack was introduced in five stages until it extended through two-thirds of the depth of the girder. Accelerometers were placed at various locations on each girder. Frequency spectra for each stage of the testing were compared to those recorded before the introduction of the crack to determine which aspects of the spectra were sensitive to the change in stiffness. The results indicate that monitoring the amplitudes at the natural frequencies and the frequency response spectrum using the cross signature assurance criterion can be used as an indicator that significant cracks have developed in a multigirder highway bridge.