Show simple item record

contributor authorMounir E. Mabsout
contributor authorKassim M. Tarhini
contributor authorGerald R. Frederick
contributor authorMarwan Kobrosly
date accessioned2017-05-08T21:24:38Z
date available2017-05-08T21:24:38Z
date copyrightAugust 1997
date issued1997
identifier other%28asce%291084-0702%281997%292%3A3%2888%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/50373
description abstractThe conventional analysis and design of highway bridges ignore the contribution of sidewalks and/or railings in a bridge deck when calculating the flexural strength of superstructures. The presence of sidewalks and railings or parapets acting integrally with the bridge deck have the effect of stiffening the outside girders and attracting more load while reducing the load effects in the interior girders. This paper presents the results of a parametric study showing the influence of typical sidewalks and railings on wheel load distribution as well as on the load-carrying capacity of highway bridges. A typical one-span, two-lane, simply supported, composite steel girder bridge was selected in order to investigate the influence of various parameters such as: span length, girder spacing, sidewalks, and railings. A total of 120 bridges were analyzed using three-dimensional finite-element analysis. American Association of State Highway and Transportation Officials (AASHTO) HS20 design trucks were positioned in both lanes to produce the maximum moments. The finite-element analysis results were also compared with AASHTO wheel load distribution factors. The AASHTO load and resistance factor design (LRFD) wheel load distribution formula correlated conservatively with the finite-element results and all were less than the typical empirical formula (S/5.5). The presence of sidewalks and railings were shown to increase the load-carrying capacity by as much as 30% if they were included in the strength evaluation of highway bridges.
publisherAmerican Society of Civil Engineers
titleInfluence of Sidewalks and Railings on Wheel Load Distribution in Steel Girder Bridges
typeJournal Paper
journal volume2
journal issue3
journal titleJournal of Bridge Engineering
identifier doi10.1061/(ASCE)1084-0702(1997)2:3(88)
treeJournal of Bridge Engineering:;1997:;Volume ( 002 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record