Show simple item record

contributor authorD. P. Tiwari
contributor authorD. K. Singh
contributor authorD. N. Saksena
date accessioned2017-05-08T21:14:56Z
date available2017-05-08T21:14:56Z
date copyrightJanuary 1995
date issued1995
identifier other%28asce%290733-9372%281995%29121%3A6%28479%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/44231
description abstractRice-husk ash (RHA) was found to be a good adsorbent for Hg(II) in aqueous solutions. Batch studies indicated that the percent adsorption decreased with increasing initial concentration of Hg(II) and particle size of adsorbent. Twenty g/L of RHA (diameter 37–50 μm) in an aqueous solution of Hg(II) with an initial concentration of 100 mg/L removed 98% of Hg(II). A contact time of 3 hr was found to be optimum. Maximum Hg(II) removal was observed near a pH of 6.0. Adsorption conformed to the Langmuir isotherm. Column experiments indicated that the adsorbed amount of Hg(II) decreased with increasing flow rate and decreasing bed height.
publisherAmerican Society of Civil Engineers
titleHg(II) Adsorption from Aqueous Solutions Using Rice-Husk Ash
typeJournal Paper
journal volume121
journal issue6
journal titleJournal of Environmental Engineering
identifier doi10.1061/(ASCE)0733-9372(1995)121:6(479)
treeJournal of Environmental Engineering:;1995:;Volume ( 121 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record