| description abstract | The majority of the land in Bihar is made up of alluvial soil, which falls into the category of problematic soils in the context of engineering applications. Therefore, to improve the properties and the long-term performance of such soil as a subgrade, one technique known as stabilization needs to be employed. On the other hand, using waste materials to construct roads is an environmentally friendly option. The objective of this paper is to evaluate the effect of rice husk ash–ground granulated blast furnace slag (RHA–GGBS) blending on the engineering performance and microstructural characteristics of alluvial soil. A novel approach was used to determine elastic modulus utilizing light weight deflectometer (LWD) testing on a California bearing ratio (CBR) mold. Otherwise, laboratory testing was conducted in accordance with Indian/American standard codes. It was observed that adding a combination of GGBS and RHA as a hybrid binder in a ratio of 70∶30 significantly improves certain soil characteristics. It was found that when the hybrid binder was added, the soil’s strength based on unconfined compressive strength (UCS), CBR, and elastic modulus (EM) increased, but its liquid limit (LL) and plasticity index (PI) significantly dropped. The optimum binder content recommendation is 10% hybrid binder, based on the findings of the UCS, CBR, and EM tests. Furthermore, it was revealed by the mineralogical and morphological analyses of soil specimens stabilized with optimum binder content that the interaction between the clayey alluvial soil and the binder led to the development of cementitious compounds and hydrated particles. Test results suggest that utilizing GGBS mixed with RHA as a hybrid binder to stabilize alluvial soil is a promising option for environmentally conscious and cost-effective construction. This study is helpful for road subgrades that have poor strength in terms of their CBR values of less than 5%, as the treatment results in a significant increase in their CBR values. Individually, GGBS can be used to stabilize subgrade soil for highway construction, whereas RHA can be used to stabilize subgrade soil for rural roads, improving their strength. Combining GGBS and RHA can result in high-strength stabilized soil that is suitable for significant infrastructure construction projects. Also, laboratory use of LWD was found to be a suitable new technique for testing stabilized soil, which can further be used as nondestructive testing in the field for compaction quality control of subgrade layers during construction. Also, this study’s findings apply to clay soils that are similar in terms of their properties. Nevertheless, areas with harsh climate conditions and soils with drastically different characteristics might not be able to immediately apply the results. | |
