| description abstract | Wrinkling is a typical failure mode of sandwich structures with thin skins, where the bending deformation of face skins occurs simultaneously in conjunction with transverse stretching deformation of core layer. To analyze the three-dimensional (3D) deformation of wrinkling, a model is required to possess a capability describing completely different deformations at each ply. Therefore, by utilizing the Chebyshev polynomial at each layer of sandwich panels, this paper focuses on proposing a higher-order model to individually illustrate deformations of the skins and the core. By means of the proposed model, a refined triangular element has been constructed. By analyzing the stability of a sandwich plate without stiffeners, the finite-element formulation has been verified by comparing it to the quasi-3D elasticity solutions. In addition, it is anticipated that wrinkling failure can be effectively restrained by designing the stiffener layout. To this end, the influence of stiffener layouts on wrinkling behaviors of sandwich plates has been investigated in detail, and it is found that the capability of resisting the wrinkling deformation can be obviously improved by designing reasonable stiffener layouts. Moreover, the translation between buckling and wrinkling behaviors of sandwich panels with different stiffeners has been also explored, which can help to better understand wrinkling deformation mechanism. In summary, the proposed model can be used to design a reasonable arrangement of stiffeners to resist the wrinkling failure of sandwich panels. | |
