| description abstract | Cross-laminated timber (CLT) buildings are constructed by connecting CLT panels with dowel-type fasteners and mechanical anchors, which govern the lateral behavior of these structures. Although these connections are mostly distributed along the perimeter of the CLT panels, creating highly redundant structures, previous research on the lateral behavior of CLT structures has mainly focused on the behavior of the connections placed at the base of the CLT shear walls, such as hold downs and angle brackets, while limited attention has been paid to the connections between perpendicular walls and their effect on the lateral response of CLT shear walls. This paper presents a comprehensive experimental study aimed at investigating the effects of the interaction between perpendicular walls on the lateral response of CLT shear walls. CLT shear walls with three different aspect ratios were analyzed by means of monotonic and cyclic tests, both in single wall configuration and connected to perpendicular walls. The experimental findings demonstrate that the structural interaction due to the perpendicular walls significantly affects the lateral response of a CLT shear wall, resulting in increased lateral stiffness, lateral capacity, and deformation capacity. In addition, the study presents two analytical models for the prediction of the lateral stiffness and the lateral capacity of CLT shear walls connected to perpendicular walls. The analytical models were validated based on the experimental results, showing reasonable agreement. | |
