| description abstract | Understanding the moisture migration of unsaturated soil in response to temperature changes is essential in soil science and geosystems applications. The coupling of thermohydro (TH) processes is a result of changes in fluid density and viscosity; however, gravity can disrupt the moisture migration of unsaturated sand initiated by a thermal gradient when the sand is considerably porous. Moreover, the moisture redistribution caused by the gravity effect is influenced by the imposed boundary temperature and initial moisture content of the unsaturated sand. Therefore, this paper presents heating tests performed on sand specimens of different gradations and subjected to various thermal gradients in a modified and well-controlled soil testing cell to evaluate the coupling behavior of TH processes in unsaturated sand. Two sands were tested in the soil testing cell, which was equipped with thermocouples (TCs) to measure the temperature and time-domain reflectometry (TDR) sensors to measure the apparent dielectric constant (Ka); three temperature boundary conditions were imposed on the soil testing cell to create two thermal gradients. This study shows that gravity, thermal boundary conditions, initial moisture content, and matric suction influence the migration of moisture: the silty sand, as compared with pure sand, more properly displayed the phenomenon of coupled TH processes in unsaturated soil when tested at a temperature gradient of 200°C/m and initial moisture content of 6%. The study provides an advanced understanding of the paired migration of heat and moisture in porous media under various conditions, including thermal gradient, initial moisture content, and gradation. When unsaturated soils are under a temperature gradient, the pore water tends to move from the heat source to a cooler end in search of moisture equilibrium. Temperature-driven moisture flow is commonly investigated in soil science, agriculture, and geosystems. For example, the soil surrounding a geosystem (electrical cables and ground heat exchangers) experiences heating and cooling cycles when heat energy is exchanged from buildings to the soil via the geosystem. This heat exchange can effectively cool the buildings in the summer and heat the buildings in the winter. To maintain effective heat transfer in the soil, it is necessary to investigate the temperature-driven moisture flow, as it has been established that redistributed moisture also significantly impacts heat transport. At the same time, the moisture flow is also influenced by gravity, particularly for coarse sands. Moisture flow in coarse sands is more prone to the effect of gravity than that in fine sands. This paper evaluates how the physical and hydraulic properties of the soil, such as gradation and suction, can affect the coupled thermal and hydraulic processes. The gravitational effect can dominate the moisture redistribution depending on the direction of the temperature gradient. | |
