| description abstract | Superabsorbent polymers (SAPs) can serve as effective internal curing agents in alkali-activated slag (AAS) systems, mitigating the risk of cracking. However, the influence of SAPs on the properties and microstructure of AAS systems is not yet fully understood. In this study, the effects of SAPs on the properties, reaction products, and internal moisture migration of AAS pastes were investigated. The water released by SAPs during curing supplemented the water consumption in the hydration process, maintained internal relative humidity, and reduced autogenous shrinkage by more than 80%. However, the addition of SAPs not only created voids in the hardened paste, as indicated by the mercury intrusion porosimetry (MIP) results, but also increased the microscopic pore volume of the paste. SAPs did not change the phase composition of AAS hydration products, but increased the differential thermogravimetry (DTG) peak corresponding to the main hydration product C(-A)-S-H gel at 28 days. The increase in chemically bound water in AAS pastes containing SAPs, along with the changes in the transverse relaxation time (T2) peak area corresponding to SAPs in the H1 low-field NMR results, likely are due to the gradual release of water during internal curing by SAPs. | |
